Tel: +8675589671022
  Request a quote

Home > News > Content
News

Use And Installation Method Of Road Speed Bump

Use and installation method of road Speed Bump

Use of road Speed Bumps

Mainly used in urban intersections, road crossings, toll channels, gardens, residential areas, parking, garages, petrol stations, such as entrances, slopes and other places on the ground.

Installation method of road Speed Bump

General installation method: Easy to install, usually using standard block any combination of methods and advanced "internal expansion anchoring technology", with screws firmly fixed on the ground, firmly installed, stable and reliable, the vehicle will not be loose when impact.

The Speed Bump is installed on the asphalt pavement 1, and the Speed Bump is arranged neatly into a straight line (black and yellow), each side of which is placed with a semicircular line end. 2, with the impact drill to install 10MM bit vertical in the Speed Bump each installation hole drilling, depth of 150MM. 3, into 150MM long, diameter 12MM long nail fixed can be.

The Speed Bump is installed on the cement pavement 1, and the Speed Bump is arranged neatly into a straight line (black and yellow), each side of which is placed with a semicircular line end. 2, with the impact drill to install 14 bit vertical in the Speed Bump each installation hole drilling, depth of 150MM. 3, into 120MM long, diameter 10MM internal expansion bolts, with 17 of the hexagon wrench can be tightened. 5. Role: To remind the driver to slow down, the car after the noise and response function to prevent the brakes when the traffic accident. Some Speed Bumps are also inlaid with reflective bodies that reflect bright red or green light at night, which can attract attention from drivers, reduce speed and improve safety.